Any Patch Panel will mount on these products (Up to 2U)

EZCD - Extension Bracket


The EZ Mount Extension Brackets, were created to allow for two (2) RMS under the shelf whenever there is a requirement to add a lightweight device that doesn't require rotation. A surge protection power strip is an example of the use of this part. Note: The EZMBS is used to allow for the swivel capability of the additional two (2) RMS, or when a heavier rack mount device is placed under the shelf.

This part can also be used to mount a rack mount (2 RMS) device vertically against a wall, or on a relay rack, where depth is limited or unavailable!


EZCD EZ Mount Network Shelf
Dimensions: Each angle bracket is 5/8" wide x 2-5/8" long (with slot) by 3-3/4" long with one (1) or two (2) RMS mounting holes with 10-32 threads.
Mounting Holes: EIA/TIA spacing.
Package Includes: Two (2) angle brackets and package of eight (8) black 10-32 screws and four (4) zinc/stainless 10-32 screws.
Mounting Option: Mounts on EZ Mount network shelf. (EZMS)

ezcd-inuse ezcd-mounted

You are here:   iNNOdata LTD >> Product Line >> EZCD-Extension Bracket

iNNOdata LTD

  • 40 Hayes Memorial Drive
  • Marlborough Ma 01752
  • Toll free: 888.334.3930
  • Local: 508-786-0309 X 12

Search Our Site

Proud Member



Proud Member

Association of Cabling Professionals