Any Patch Panel will mount on these products (Up to 2U)

EZCB - Secure-A-Shelf


The EZ Mount Secur-A-Shelf is yet another truly unique product from iNNOdata, LTD. It was designed to provide not only security for the EZ Mount Network Shelf, which had been requested for over two years, and it can be added "after the fact" without disturbing station cables already installed, THUS ELIMINATING the NEED TO RE-CERTIFY THE NETWORK!

NOTE: Adequate venting slots are provided in walls, bottom and top panels. There is also a provision for mounting a "muffin type" fan in the top if necessary!

The Secur-A-Shelf will provide security for a complete network, including electronics (hub(s), switch, modem etc.), power strip and up to a 48 port patch panel. It allows access to station cables from the front of the enclosure by virtue of the swivel bracket on the shelf installed inside.


EZCB EZCB - Secure-A-Shelf
Dimensions: 22" wide x 18" deep and 13" high. (There is a clearance of 5 1/2 inches between the top of the enclosured EZMS and the top cover of the EZCB Product.)
Mounting Holes: Four (4) each, side slotted key hole type mounting holes to allow for 16" on center mounting.
Package Includes: Package of four (4) 10-32 black screws for use in bottom plate through side wall flanges. Support Rod, to hold cover open. Secur-A-Shelf is comprised of four (4) separate pieces to include: Left and Right Hand Side Walls (2), Bottom Plate (1) and Top/ Front Panel (Hinged). A plexi window is included in the front panel. Construction is of lightweight aluminum. The modular construction allows for the unit to be locked by an ordinary padlock.


You are here:   iNNOdata LTD >> Product Line >> EZCB-Secure-A-Shelf

iNNOdata LTD

  • 40 Hayes Memorial Drive
  • Marlborough Ma 01752
  • Toll free: 888.334.3930
  • Local: 508-786-0309 X 12

Search Our Site

Proud Member



Proud Member

Association of Cabling Professionals